china Pulleys manufacturer, wholesaler, supplier, export, factory, - hangzhou ever-power transmission co., ltd.

Current Location : Home - > Company Profile

PRODUCT CATEGORIES

Chain

Sprocket

Gear

Gear rack

V-Belt Pulleys

Timing Belt Pulleys

Coupling

Bushes

Belt

Speed reducer

Link chain

other products

new

Search List

Total 1 Product(s) in Pulleys

Select

Model:Metric Standard Series - Flat Belt Pulleys For Taper Bushes

MODEL:Specifications:
?Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
?Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
?The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
?Width of different specification of timing belt and pulley must conform to form4.
?Outside diameter of pulleys and size should be as form's regulation.
?We can also produce pulleys even sizes are not in the form.
?The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
?The pitch&tooth type of double sided timing belt is same as synchronous belt.
?There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:Metric Standard Series - V-Belt Pulleys With Solid Hub

Model:Metric Standard Series - Belt pulleys for Taper Bushes-SPZ3

MODEL:

Specifications:

?Belt and pulley of our company can be attachment or replacement of imported belt and pulley.

?Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.

?The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.

?Width of different specification of timing belt and pulley must conform to form4.

?Outside diameter of pulleys and size should be as form's regulation.

?We can also produce pulleys even sizes are not in the form.

?The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.

Features:

?The pitch&tooth type of double sided timing belt is same as synchronous belt.

?There are two kinds of double sided timing belt:

o DA type: Arrangement symmetrical ( see section a)

o DB type: Arrangement overlapping ( see section b)

Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:American Standard Series - No.80-2. Sprockets With Split Taper Bushings

MODEL:Specifications:
•Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
•Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
•The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
•Width of different specification of timing belt and pulley must conform to form4.
•Outside diameter of pulleys and size should be as form's regulation.
•We can also produce pulleys even sizes are not in the form.
•The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
•The pitch&tooth type of double sided timing belt is same as synchronous belt.
•There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
•Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:American Standard Series - No.35 Sprockets With Split Taper Bushings

MODEL: Specifications:
•Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
•Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
•The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
•Width of different specification of timing belt and pulley must conform to form4.
•Outside diameter of pulleys and size should be as form's regulation.
•We can also produce pulleys even sizes are not in the form.
•The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
•The pitch&tooth type of double sided timing belt is same as synchronous belt.
•There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
•Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:American Standard Series - No.40-3 Sprockets With Split Taper Bushings

Model:American Standard Series - No.60-2. Sprockets With Split Taper Bushings

MODEL: Specifications:
•Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
•Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
•The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
•Width of different specification of timing belt and pulley must conform to form4.
•Outside diameter of pulleys and size should be as form's regulation.
•We can also produce pulleys even sizes are not in the form.
•The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
•The pitch&tooth type of double sided timing belt is same as synchronous belt.
•There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
•Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:American Standard Series - No.120 Sprockets With Split Taper Bushings

MODEL: Specifications:
•Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
•Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
•The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
•Width of different specification of timing belt and pulley must conform to form4.
•Outside diameter of pulleys and size should be as form's regulation.
•We can also produce pulleys even sizes are not in the form.
•The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
•The pitch&tooth type of double sided timing belt is same as synchronous belt.
•There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
•Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Model:American Standard Series - Stainless Steel Sprockets-No.25

Model:American Standard Series - Stock Sprockets-No.41

Model:American Standard Series - Stock Sprockets-No.100

Model:American Standard Series - Stock Sprockets-No.100-3

Model:American Standard Series - Taper bore Sprockets-No.100

MODEL: Specifications:
•Belt and pulley of our company can be attachment or replacement of imported belt and pulley.
•Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
•The tolerance of outside diameter, end bounce 7 wrap direction of pulley should conform to Form1,form 2 & form3.
•Width of different specification of timing belt and pulley must conform to form4.
•Outside diameter of pulleys and size should be as form's regulation.
•We can also produce pulleys even sizes are not in the form.
•The material of pulley mainly composed of carbon steel, if possible aluminum alloy nylon can also be employed; if external diameter is larger than 250 mm, iron is used.
Features:
•The pitch&tooth type of double sided timing belt is same as synchronous belt.
•There are two kinds of double sided timing belt:
o DA type: Arrangement symmetrical ( see section a)
o DB type: Arrangement overlapping ( see section b)
•Note: we can produce symmetrical (DA) & overlapping (DB) two kinds double sided timing belt, for particular specification, we can also make according to clients' drawing or sample

Select

Product Search

CONTACT US

Add:wener west road 268# 23-101

Hangzhou,China
Post Code:310012
Tel:+86-571-88220971/73
Fax:+86-571-88220972
E-mail:shen@china-reducers.com