扭力限制器
防止機械損壞, 避免停機損失

TUNG SHIN扭力限制器是一種保護裝置。在機器 
負載震動,超載或機械故障而致所需之扭力超過
設定值時,它以滑動之方式限制傳動系統所傳動
之扭力,而於超載情形消失後自動齒合,不必再
行設定TUNG SHIN扭力限制器防止機械損壞,避
免了昂貴的停機損失。
TUNG SHIN扭力限制器採用彈簧負荷式磨擦表面
,以螺帽或螺栓調整彈簧力,預設其滑動扭力。
TUNG SHIN扭力限制器可在鏈輪、齒輪、槽輪或
法蘭板作為中心構件,夾在其磨擦面中間使用之
TUNG SHIN扭力限制器之額定性能實際可靠,符
合最佳之彈簧負荷及表面壓力而使滑動時間更長
在預設扭力時再行齒合,提供永久性的保養,本
扭力限制器不似剪銷式機械一次使用就需作廢,
而是可以重覆使用者。

EPT TORQUE LIMITER

Prevent machine Damage and eliminate Costly Downtime

 EPT Torque Limiter is a protective devic that limits the torque transmitted in a drive
system by slipping when the torque demand ex-ceeds a preset value as a result of shock loads ,
overloads, or machine jams. lt automatically re-engages when the overload is removed, No re-
setting is required.
EPT Torque Limiters prevent machine damage and eliminate costly downtime. TUNG
SHIN Torque Limiters utilize spring-loaded fric-tion surfaces for their opeation, and slip torque
is preset by adjusting of the spring force using the adjustment nut bolts.

EPT Torque Limiters can be used with a sprocket, gear, sheave, or flange plate as a sprocket, gear, sheave,
or flange plate as the center member clamped between two fric- tion facings.
 EPT Torque Limiter ratings are realistic and consistent with optimum spring loads and face pressures that
permit longer slip time, maintain re-engagement at preset toque, and provide long lasting protection.
This is an important advantage over the shear-pin mechanism which serves only as a one-shot remedy.


 

<Last Page

链轮,链条,齿轮, sprockets, gears, roller chains / Tel: 0086 -571-88220971 Fax: 0086-571-88220972 E-Mail: hzpt@hzpt.com P108

Next Page>