構造與零件組 CONTSTRUCTION AND COMPONETNT PARTS

Components 零/組件
Pin Link 銷桿
Roller Link滾子內目
Riveted-Type 卯接式 Cotter-Type 銷型

ROLLER LINK
Consists of two bushings press fitted to each of the link plates and tow rollers. Just enough clearance is provided for the rollers to turn freely over links are used for both single and multiple strand chains.

PIN LINK
Consists of two pins and tow pin link plates. The pins are press fitted to both plates and riveted after assembly

PIN LINK (Cotter pin type)
Consists of two pins and tow pin link plates. The pins are press fitted to both plates. One end of each pin is riveted and the other end is supplied with cotters.


Comnecting Link 連接接頭

Cotter Pin Type 開口銷式 (全目接頭)
Spring Clip Type彈簧夾式 (全目接頭)

CONNECTING LINK (Cotter pin type)
For chains of 3/4" pitch and larger. Similar to the pin link except that the detachable plate is slip-fitted to the pins and retained by cotter pins.

CONNECTING LINK (Spring clip type)
For chains of 3/4" pitch and smaller. Similar to the pin link, except that the detachable plate is slip-fitted to the pins and retained by a spring clip.


Offest Link 偏位接頭

Single-Pitch Offset Link 單節距半目接頭
Two-Pitch Offset Link 雙節距半目接頭

SINGLE-PITCH OFFSET LINK
Consists of two offset link plates, on special pin, one bushing and one roler.The pin is slip-fitted and retained by a cotter pin.

TWO-PITCH OFFSET LINK(Assembly press fit type for single chain only)
Consists of a single pitch offset link and a roller link assembled together and riveted. The pin is press fitted to the offset link plated.



<Last Page
链轮,链条,齿轮, sprockets, gears, roller chains / Tel: 0086 -571-88220971 Fax: 0086-571-88220972 E-Mail: hzpt@hzpt.com P1
Next Page>

若您有相關產品及相關技術資料問題,歡迎來電Tel:0086-571-88220971洽詢!