Ever - Power Transmission Group
Tel: 0086-571-88220971/3 Fax: 0086-571-88220972 E-Mail: hzptcorp@gmail.com
SS CLASS BUSHED STEEL CHAIN
Moline SS Bushed Steel Chain is ideal for operating under extremely gritty or abrasive conditions and for elevators where centers are widely spaced. This chain is often referred to as “Steel Bushed” or “Rollerless.”
The parts are machined and heat treated with the goal of maximum strength and wear per pitch. Accurately manufactured sidebars assure tight pins and bushings and close pitch control.
SS CLASS BUSHED STEEL
CHAIN MATERIALS
MOLINE CHAIN NO. |
PINS |
BUSHINGS |
SIDEBARS |
SS 102B SS 110 SS 111 SS 131 SS 150 SS 188 SS 856 SS 857 SS 859 SS 864 |
Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Induction Hardened Alloy Steel, Induction Hardened Alloy Steel, Induction Hardened Alloy Steel, Induction Hardened |
Carbon Steel, Case Hardened Carbon Steel, Case Hardened Carbon Steel, Case Hardened Carbon Steel, Case Hardened Carbon Steel, Case Hardened Carbon Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened Alloy Steel, Case Hardened |
Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated Carbon Steel, Heat Treated |
Ever - Power Transmission Group
. . . chain - sprockets - buckets
Toll Free:
Phone: 571-8822-0971 Fax: 571-56287761
Local:
Phone: 571-8822-0973Fax: 571-8822-0972
www.hzpt.com
Sidebars are produced to accommodate the ends of the pins and bushings* which lock into position in the sidebars and will not rotate during chain operation.
The materials used are carefully selected. For example, the pins are alloy steel that contain nickel, chrome, and molybdenum which improves the chain life through its greater fatigue resistance, improved abrasive resistance, and increased tensile strength at both high and low temperatures. All of these factors result in a premium product for conveyor and elevator service for gritty, abrasive, and dusty fine particle materials such as ashes, crushed coal, soda ash, cement, crushed stone, and gravel.
These chains are available in pitch sizes:
2.609 to 6.050 inches; Average Ultimate Strengths from 25,000 to 200,000 pounds; Recommended Working Loads from 2,750 to 21,800 pounds.
Assorted attachments are offered.
SS Chain is offered in riveted and cottered construction except Nos. SS 856, SS 857 and SS 859, which are furnished in cottered construction only. All of the cottered construction chain uses T-head cotters. Cottered construction will be furnished unless Riveted is requested.
Moline SS Bushed Steel Chain is made in accordance with manufacturer’s standards and may be interchanged with standard bushed steel chain of other manufacturers.
Sprockets are available in Brutaloy, cast steel, and flame cut when required.
*NOTE: Bushing with milled ends used on
SS188. Balance of SS Class Bushed
Steel Chain manufactured with round
bushing press fitted into side bars.